Layout; Items Supplied; Intended Use - Parkside PABSS 3,6 Li Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Anleitung_4513425:_
22.12.2009
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place
at a temperature of 10-20°C. Protect them
from humidity and direct sunlight. Only
place fully charged batteries in storage
(charged at least 40%).
Prevent the lithium-ion battery pack from
freezing. Battery packs which were stored
below 0°C for more than 60 minutes must
be disposed of.
When handling batteries beware of
electrostatic charge: Electrostatic
discharges cause damage of the electronic
protection system and the battery cells.
Avoid electrostatic charging and never
touch the battery poles.
Rechargeable batteries and cordless electric
machines and tools contain materials that are
potentially harmful to the environment. Never
place any cordless electric machines or tools in
your household refuse. When cordless electric
machines or tools become defective or worn,
remove the rechargeable batteries and return
them to iSC GmbH (address: Eschenstrasse 6,
D-94405, Germany). If the rechargeable
batteries cannot be removed, return the
complete cordless machine or tool.
You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
When shipping or disposing of batteries
and cordless tools, always ensure that they
are packed individually in plastic bags to
prevent short circuits and fires.
Do not lose this safety information.
14:07 Uhr
Seite 51
3. Layout (Fig. 1)
1. Bit chuck
2. LED lamp
3. Locking button
4. ON/OFF switch for lamp
5. Battery capacity indicator
6. Button for battery capacity indicator
7. Charging control lamp
8. Charging connection
9. ON/OFF switch
10. Clockwise/Counter-clockwise selector
switch
11. Battery charger
12. Charging cable
13. Torque selector
14. Locking sleeve

4. Items supplied

Take all parts out of the packaging and check
that they are complete.
Cordless Screwdriver PABSS 3.6 Li
Battery charger
26 Bits
Bit holder
Case
Operating Instructions

5. Intended use

The cordless screwdriver is designed for
tightening and loosening screws.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and
not the manufacturer will be liable for any
damage or injuries caused as a result thereof.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes.
GB/
MT
51

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido