Metra 99-9714WR Instrucciones De Instalación página 3

5. Remove (11) screws securing the radio
bracket: (Figure E)
a. (2) T-27 Torx screws shared with the
gauge cluster and a third T-27 Torx
screw to remove the gauge cluster in
step 7.
b. (4) 5/32" Allen screws facing outward.
c. (4) T-25 Torx screws secured to the
radio.
d. (1) T-25 Torx screw shared with the
storage pocket.
6. Remove the radio bracket. (Figure E)
Note: This bracket will be reused with
the 99-9714WR kit.
7. Remove the gauge cluster. (Figure E)
8. Remove (4) 3/16 Allen screws from the
sides of radio. (Figure F)
Note: These screws will be reused with
the 9714 kit.
9. Slide the radio out toward the rear of the
bike, and unplug the radio. (Figure F)
FAIRING DISASSEMBLY
(Figure E)
(CONT)
(Figure F)
REV. 9/11/2020 INST99-9714WR
3