Before You Start; Part Names And Functions - Pioneer DV-2242 Manual De Instrucciones

Before you start

Loading the batteries in the
remote control
1
Open the battery compartment.
2
Insert 2 batteries (AAA/R03 size
battery) with correct polarity ( / )
as indicated.
3
Close the battery compartment.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near
a heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
NOTE
• When inserting the batteries, make sure not to
damage the springs on the battery's () terminals.
Do not use any batteries other than the ones
•
specified. Also, do not use a new battery together
with an old one.
• When loading the batteries into the remote control,
set them in the proper direction, as indicated by the
polarity marks ( and ).
• Do not heat batteries, disassemble them, or throw
them into flames or water.
• Batteries may have different voltages, even if they
are the same size and shape. Do not use different
types of batteries together.
To prevent leakage of battery fluid, remove the
•
batteries if you do not plan to use the remote
control for a long period of time (1 month or more).
If the fluid should leak, wipe it carefully off the
inside of the case, then insert new batteries. If a
battery should leak and the fluid should get on your
skin, flush it off with large quantities of water.
When disposing of used batteries, please comply
•
with governmental regulations or environmental
public institution's rules that apply in your country/
area.
Connections
Player's rear panel
White
L
VIDEO
OUT
R
Red
DIGITAL
OUT COAXIAL AUDIO OUT
DV-2242
Yellow
Audio/videocable
(commercially
available)
TV or AV receiver
• Be sure to turn off the power and unplug the power
cord from the power outlet whenever making or
changing connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting using commercially available
cables
• The player can be connected to an AV amplifier,
etc., using commercially available digital audio
cables and component video cables.

Part names and functions

Remote Control
1 14
2
15
16
3 17
4
5
18
6 19
7
20
8
9
21
10
11 11
22
12
11 23
13
DV-2242
NOTE
The illustrations used in this operating instructions
•
are DV-2242.
1  STANDBY/ON
Press to turn the power on and off.
2 Number buttons (0 to 9)
Use these to specify and play the title, chapter,
track or file. Also use to select items on MENU
screens, etc.
3 TOP MENU
Press to display the top menu of the DVD-Video.
4 / / /
Use these to select items, change settings and
move the cursor.
ENTER
Use this to implement the selected item or enter
a setting that you have changed.
5 HOME MENU
Press to display/hide HOME MENU.
HOME MENU
DVD
Audio Settings
Video Adjust
Play Mode Disc Navigator
Initial Settings
Audio Settings (page 7)
•
• Video Adjust (page 7)
• Play Mode
• A-B Repeat
The specified section within a single title
or track is played repeatedly.
• Repeat
Plays titles, chapters, tracks or files
repeatedly.
• Random
Plays titles, chapters or tracks in random
order.
Program
•
See page 6 for details.
Search Mode
•
Plays the specified number or time within
the title, chapter, track or file.
The Play Mode function may not work for some
discs or files.
Disc Navigator (see MENU on page 4)
•
• Initial Settings (page 6)
6  PLAY
Press to start playback.
7  /  /
• Press during playback to fast-reverse.
• Press in the pause mode to move backward
frame-by-frame.
• Press and hold in the pause mode to play
back slowly (reverse).
3