Replacing The High Beam Bulb - MV Agusta BRUTALE 1090RR Manual De Mantenimiento

1.13.3. Replacing the high beam bulb

Remove the headlight from its support as described
in paragraph 1.13.2.
To take the headlight lamp out, press the connector
on the side and pull it outwards.
Detach the connector from the burnt-out bulb.
CAUTION: Do not touch the bulb glass with
bare hands. If you do, clean the bulb with an
oil-free solvent.
Insert the connector in the new bulb.
Fit the lamp back in and slightly press it into its hou-
sing to secure it.
Replace the headlight on its support, following the
instructions described in paragraph 1.13.2.
MAINTENANCE
- 43 -
1
1