How To Select The Mapping Of The Control Unit - MV Agusta F3 ORO Serie Manual De Uso

4.4.6. How to select the mapping of the control unit

On the F3 model is it possible to select different control
unit mappings which allow to obtain variable power and
performance characteristics based on the type of vehi-
cle use.
WARNING
The mapping selection may be changed or set
when the engine is running, the gear in neutral,
the motorbike stationary with your feet on the
ground. Do not change the display while driving.
The mapping of the control unit can be selected by
pressing the start button when the engine is switched
on. This way the digit of the chosen mapping is increased
by going to the following numeric value. Said value may
vary between 1 and 4; the relative mapping characteris-
tics are listed on the following table.
Mapping
1
number
Mode Normal
OPERATION
2 3 4
Rain Sports
Customised
- 51 -
4
4