Worx landroid WR140 El Manual Del Propietario página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting started
Secure the wire to the ground using pegs
• Place pegs at approximately 80cm to each other (fig. 6)
• Make sure the wire is always in close touch with the ground (fig. 7)
6
Lay perimeter islands, if needed
• Protect flower beds, ponds, tree roots and other areas by surrounding them with the boundary wire
• Depart the edge at a right angle to reach the area to be protected
• Surround the area with the wire, keeping 10.2 in. distance, until you close the island
• Always lay the wire clockwise. Failing to do so will make the mower drive into the island
• Return to the edge of the lawn following the same path
8
Bertelsen method: how to make perfect 90° angles with corners facing the lawn
If there are 90 degree corners that face the inside of your lawn, use the Bertensen ruler to help Landroid make perfect turns (and
remove the risk that Landroid hits an obstacle on the border of the lawn whilst doing this maneuver).
9
16
7
EN

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Landroid wr143Landroid wr150Landroid wr153

Tabla de contenido