Input Specifications - Peavey XR 600F Manual Del Propietário

Specifications:

Input Specifications:

Function
Lo-Z
Channel 1-6
Hi-Z
Channel 1-4
Line Input
Channel 5-6
Tape
Channel 7
0 dBV=1V (RMS)
** Min input level (sensitivity) is the smallest signal that will produce nominal output (2 dBu) with channel and master
level controls set for maximum gain.
* Nominal settings are defined as all controls set a 0 dB (or 50% rotation for rotary pots)
XR 600F Output Specifications:
Function Minimum Load Z
(ohms)
Main 600
Monitor 600
Tape 10 k
+2 dBu = 0 dBV = 1V (RMS)
Gain:
Mic Input to L and R Output
Hi-Z Input to L and R Output
Line Input to L and R Output
Input Z Input Gains
(ohms) control
Min setting
2 k Max w/o pad
(50 dB)
Max. w/pad
(25 dB)
100 k Max w/o pad
(50 dB)
Max w/pad
(25 dB)
22 k 30 dB
20 k Max. Gain
(30 dB)
Nominal
+2 dBu
+2 dBu
-10 dBu
XR ® 600F
Input Levels
Min** Nominal*
-60 dBu -30 dBu
-35 dBu -5 dBu
-60 dBu -30 dBu
-35 dBu -5 dBu
-28 dBu +2 dBu
-28 dBu +2 dBu
Output Level
Max.
+21 dbu
+21 dBu
+10 dBu
60 dB (Max. Gain)
60 dB (Max. Gain)
30 dB (Max. Gain)
Bal/
Max UnBal.
-11 dBu Bal.
+13.5 dBu
-12 dBu Bal.
+12.5 dBu
+21 dBu Unbal. 1/4" Phone: Tip (+),
+21 dBu Unbal. RCA Jacks
Bal./Unbal.
Unbal.
Unbal.
Unbal.
Connector
XLR: Pin 1 Gnd,
Pin 2 (+), Pin 3 (-)
1/4" TRS: Tip (+),
Ring (-),
Sleeve Ground
Sleeve Ground
Connector
1/4" Phono Tip (+),
Sleeve Ground
1/4" Phono Tip (+),
Sleeve Ground
RCA