Installing/Removing Headrest; Adjusting Headrest - Harmony HMYFLDHBB-S3 Manual De Instrucciones

INSTALLING/REMOVING HEADREST

! The headrest MUST be used at
ALL TIMES.
1. Ensure that the headrest (both
sides) and backrest are locked in
the open position, and that they
are both facing the same direction.
2. Insert the rectangular extension
of the headrest into the opening
at the top of the backrest ❶.
3. While squeezing the headrest
height adjustment handle (found
on the back of the headrest), push
down on the headrest until it is fully inserted to its
lowest position in the backrest.
4. Tuck headrest fabric under backrest fabric.
5. To remove
LIFTING THE LOCKING TAB (see
"Parts list"), simultaneously squeeze
the headrest height adjustment
handle while pulling headrest up and out of backrest.
This booster seat has seven (7) headrest height positions.
1. Squeeze the headrest height
adjustment handle and lift (pull
up) or lower (push down) headrest
until desired height is achieved.
! BOTTOM OF THE HEADREST
MUST BE AT OR JUST ABOVE
YOUR CHILD'S SHOULDERS.
2. Release
adjustment handle and listen for
a 'click' to make sure headrest is
locked in position.
headrest:

ADJUSTING HEADREST

the headrest
WHILE
height
❶
20