Blodgett DFG-50 Manual De Instrucciones página 17

Operation
CH-Pro3 (Solid State Programmable Digital Control)
1
2
4
5
7
8
10
12
13
15
16
Gas Models
Only
Figure 15
NOTE: Operation is restricted to qualified person-
nel.
OPERATION
Oven Startup:
1. Turn the SELECTOR SWITCH (1) to the de-
sired cook position. The burners ignite or the
elements come on. The HEAT INDICATOR (7)
lights.
On gas models, if the burner does not ignite
within a few seconds, the RESET ALARM
LIGHT (15) comes on. Press the RESET
SWITCH (16) to restart the burner.
NOTE: If the oven will not start after several at-
tempts contact a qualified installer.
Manual Operation:
NOTE: Press the arrow keys to change the cook
time and temperature at any point during
3
manual operation.
1. Press the MANUAL PRODUCT KEY (11). The
manual and fan key LEDs light.
6
2. Press the TIME ARROW KEYS (3) to enter the
9
cook time.
For Cook with Pulse --- Press the FAN KEY
11
(9). Use the TIME ARROW KEYS (3) to enter
the pulse time. The fan key LED flashes.
14
3. Press the TEMPERATURE ARROW KEYS (6)
to enter the cook temperature.
4. For Cook and Hold --- Press and hold the
HOLD KEY (8). At the same time, use the TEM-
PERATURE ARROW KEYS (6) to enter the
hold temperature. The hold key LED lights.
5. The READY INDICATOR (4) lights when the
oven has reached the cook temperature.
6. Press the START KEY (12). The TIME DISPLAY
(2) counts down. The manual key LED flashes.
7. When the cook time expires the LEDs and dis-
plays flash and an alarm sounds. Press the
STOP KEY (14) to silence the alarm.
NOTE: In Cook and Hold the alarm self can-
14
cels. The oven cools to the hold tem-
perature. The time display counts up.
Press the HOLD KEY (8) to turn off hold
mode.