Fanimation DISTINCTION D1 Serie Manual Del Usuario página 16

How to Replace the Cover Switch Housing (Continued)
4B. The wire connection
Cut o the 2 single-pin connectors from motor
assembly and strip the wires. Securely connect the
two motor wires to the two light wires using wire
connectors. (Figure 5)
5. Assemble the cover switch housing to
adapter-switch housing assembly using the provided
screws. (Figure 6)
APF108 HARDWARE USED:
Wire
Connectors
APF108 HARDWARE USED:
Screw
16
Motor Assembly
Light Kit
Figure 5
x 2
Cover Switch Housing
Figure 6
x 3