How To Replace The Cover Switch Housing - Fanimation DISTINCTION D1 Serie Manual Del Usuario

How to Replace the Cover Switch Housing

WARNING
Turning o wall switch is not su cient. To reduce the
turned o
installing the cover switch housing.
1. Remove the cover-switch assembly from the
inner-switch housing assembly by twisting in the
counterclockwise direction. (Figure 1)
2. Remove the inner-switch housing assembly
from the adapter-switch housing assembly.
(Figure 2)
3. Route the wires through the cover switch housing
and assemble flat washer, spring washer and hex nut.
(Figure 3)
4A. The pin connection
Connect the 2 single-pin connectors from the light kit
to the 2 single-pin connectors from motor assembly.
(Figure 4)
Cover-Switch
Assembly
Inner-Switch
Housing
Assembly
Hex Nut
Flat Washer
Light Kit
15
Inner-Switch Housing
Assembly
Figure 1
Adapter-Switch
Housing
Assembly
Figure 2
Spring Washer
Cover Switch
Housing
Figure 3
Motor Assembly
Light Kit
Figure 4