Pressing The Shutter Button - Canon PowerShot SX230 HS Guía De Inicio

Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents are
completely erased. Be careful when transferring or disposing of a memory
card. When disposing of a memory card, take precautions such as
physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
• Perform a low-level format (see Camera User Guide) of the memory card
when the camera does not operate properly, the recording/reading speed
of a memory card has dropped, when continuous shooting speed slows
down, or when movie recording stops suddenly.

Pressing the Shutter Button

To take images that are in focus, be sure to first press the shutter button
lightly (halfway) to focus, then press fully to shoot.
Does the length of the shutter sound change?
• Since the time required to shoot differs depending on the scene you want to
take, the length of the shutter sound may change.
• If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you shoot without pressing the shutter button halfway, the image may not
be in focus.
Press halfway
Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
Press fully
(Press fully to shoot).
The camera plays the shutter sound and
takes the shot.
Since the shot is being taken while the
shutter sound plays, be careful not to move
the camera.
Pressing the Shutter Button
(Press lightly to focus).
17