Shooting Or Viewing Images In Easy Mode - Canon PowerShot SX230 HS Guía De Inicio

Shooting or Viewing Images in Easy Mode

In Easy mode, operational instructions are displayed on the screen, and the
camera is set so that only the buttons, the zoom lever and the movie button
(p. 24) explained on this page are functional. This prevents incorrect
operation of the camera, allowing even beginners to take and view worry-free
pictures.
Shooting
Since the flash will not fire when lowered, you cannot change settings even
if you press the r button. To set the flash to
press the r button to change the setting.
Viewing
Set the mode dial to 9.
Follow Steps 3 – 5 on pp. 18 – 19 to shoot
(no sound will play).
Press the r button to turn off the flash. !
will appear on the screen. Pressing the r
button again turns on the flash and
appears on the screen. The flash will
automatically fire in low light conditions.
, first raise it manually, then
Press the 1 button, then press the qr
buttons or turn the  dial to switch
images.
Press the 1 button, then press the m
button, and all the shots you have taken
will display for about 3 seconds each.
Press the m button again to stop the
slideshow.
To erase an image, choose the image to
erase and press the p button. Press the qr
buttons or turn the  dial to choose [Erase],
then press the m button.
23