THROTTLE CABLE ADJUSTMENT
To check the correct adjustment of the throttle op-
erate as follows:
- move the upper rubber cap (1);
- by moving cable (2) back and forth check for 2
mm. clearance;
- should this not be the case, release the check nut
(3) and appropriately turn the adjustment screw
(4) (unscrewing reduces the clearance, tightening
increases it);
- Lock the check nut (3).
4
1
WARNING*: Operation with damaged throttle
cable could result in an unsafe riding condi-
tion.
WARNING*: Exhaust gas contains poisonous
carbon monoxide gas. Never run the engine in
a closed area or in a confined area.
2
3
3
EN - 27