Introductory Comment; General Rules Of Security; Symbology - Tornado 99680T Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTORY COMMENT

Thank you for having chosen our machine. This floor
cleaning machine is used for the industrial and civil
cleaning and is able to clean any type of floor. Dur-
ing its advance movement, the combined action of
the brushes and the detergent solution removes the
dirt which is aspirated through the rear suction as-
sembly, giving a perfectly dry surface.
The machine must be used only for such purpose. It
gives the best performance if it is used correctly and
maintained in perfect efficiency. We therefore ask
you to read this instruction booklet carefully when-
ever difficulties arise in the course of the machine's
use. In case of need, we ask you to contact our ser-
vice department for all advice and servicing as may
prove necessary.

GENERAL RULES OF SECURITY

The rules below have to be followed carefully in or-
der to avoid damages to the operator and to the ma-
chine.
- Read the labels carefully on the machine. Do not
cover them for any reason and replace them imme-
diately if damaged.
- The machine must be used exclusively by author-
ized staff that has been instructed for its use.
- During the working of the machine, pay attention
to other people and especially to the children.
- Do not mix different detergents, avoiding harmful
odours.
- Do not place any liquid containers onto the ma-
chine.
- Storage temperature: between -25°C and +55°C.
- Perfect operating temperature: between 0°C and
40°C.
- The humidity should be between 30 and 95%.
- Do not use the machine in explosive atmosphere.
- Do not use the machine as a means of transport.
- Do not use acid solutions in such concentrations
that could damage the machine and/or the persons.
- Avoid working with the brushes when the machine
stands still, in order to prevent floor damages.
- Do not use the machine on surfaces covered with
inflammable liquids or dusts (for example hydrocar-
bons, ashes or soot).
- In case of fire, use a powder fire-extinguisher.
Do not use water.
- Do not strike shelvings or scaffoldings, where there
is danger of falling objects.
- Adapt the working speed to the adhesion condi-
tions.
- Do not use the machine on areas having a higher
gradient than the one stated on the number plate.
- The machine has to carry out simultaneously the
operations of washing and drying. Different opera-
tions must be carried out in restricted areas prohib-
ited to non-authorized personnel.
- Signal the areas of moist floors with suitable signs.
- If the machine does not work properly, check by
conducting simple maintenance procedures. Other-
wise, ask for technical advice to an authorized assis-
tance centre.
- Where parts are required, ask for ORIGINAL spare
parts to the distributor and/or to an authorized deal-
er.
- Use only ORIGINAL brushes indicated in the para-
graph "RECOMMENDED BRUSHES".
- For any cleaning and/or maintenance operation
take off the power supply from the machine.
- Do not take off the protections which require the
use of tools to be removed.
- Do not wash the machine with direct water jets or
with high water pressure nor with corrosive material.
- Every 200 working hours have a machine check
through an authorized service department.
- In order to avoid scales on the solution tank filter,
do not fill the detergent solution many hours before
the machines' use.
- Before using the machine, check that all panels
and coverings are in their position as indicated in
this use and maintenance catalogue.
- Be sure the recovery tank is empty before remov-
ing it.
- Restore all electrical connections after any mainte-
nance operation.
- Provide for the scrapping of the material of normal
wear following strictly the respective rules.
- When your machine has to stop activity, provide
for the appropriate waste disposal of its materials,
especially oils, batteries and electronic components,
and considering that the machine itself has been,
where possible, constructed using recyclable materi-
als.

SYMBOLOGY

Symbol denoting the solution
valve.
Indicates the solution valve lever.
Indicates the signal lamp of the
open solution valve.
Symbol denoting the brush.
Indicates the switch of the
brushes motor.
Symbol denoting the suction
motor.
Indicates the switch of the suction
motor.
Symbol denoting up – down of
the squeegee.
Indicates the squeegee lever.
Symbol denoting the charge level
of the batteries.
Symbol denoting the hour
meter.
Indicates the exhaust hose of
the recovery tank.
Indication of the maximum
temperature of the solution
detergent.
It is placed near the charging
hole of the solution tank.
18
Symbol denoting switching on.
Indicates the general switch of
the machine.
Symbol denoting the crossed
bin. Indicates that at the end of
its activity, the machine has to
be disposed conforming to the
laws in force.
Symbol denoting the open book.
Indicates that the operator has
to read the manual before the
use of the machine.
Symbol denoting the open book.
For the good functioning of the
incorporated battery recharger
(optional), read the manual of
the constructor.
Warning symbol.
Read carefully the sections
marked with this symbol, for the
security of both the operator
and the machine.

Publicidad

Tabla de contenido
loading

Tabla de contenido