Air Adjustment; Position Of Electrodes - Ecoflam AZUR 40 Manual De Instrucciones

B LB 476 Azur 40 -60 Blu120 P/ MC
A
AZUR 40 - 60
DETECTION
ELECTRODE
IGNITION
ELECTRODE
REMOVING THE BLAST TUBE
SETTING THE FIRING HEAD
Adjustment of the head position allows the combustion para-
meters to be optimized. The head is adjusted by turning the
screw shown in the figure.
+
—˚

AIR ADJUSTMENT

To adjust the quantity of air,
loosen screw "A" and turn the
air regulation in the direction
indicared by the arrows + and -
. At the end of the regulation,
tighten screw "A" again.

POSITION OF ELECTRODES

pag.18
HEAD POSITION
AZUR 40-60
BLU 120 P/MC(multibloc)
G 20 - 25
G 30 - 31
DETECTION
ELECTRODE
IGNITION
ELECTRODE
Power
MIN. Average
0 2
0 2
+
-
BLU 120 P MC
(multibloc)
MAX.
4
4