Set Password - Bushnell TrailScout 11-9600 Guia De Instalacion

Setup Guide (cont.)
b) SETUP Mode [move switch K1 from UP (ON) position to center position]:
Press Up or Down buttons to scroll through choices of DATE, TIME, NAME and PASSWORD
to modify or set these functions.
(1) SET DATE: When the LCD shows the date, press the ENTER key to modify the date.
Press Up or Down button to select 1-12 then press the ENTER button to confirm
the two digit month. The cursor will then move to the day.
Set Date
Press Up or Down button to select 1-31 then press ENTER to confirm the two
09/18/04
digit day. Then the cursor will move to the year.
Press Up or Down button to select 0-99,then press ENTER to confirm the two
digit year. From Set Date, press the Down button to set the time.
(2) SET TIME: When the LCD shows the time, press the ENTER key to modify the time.
Press Up or Down button to select 1-12, then press ENTER to confirm the two
Set Time
digit hour. Then the cursor will move to the minute.
06: 30 PM Press Up or Down button to select 0-59, then press ENTER to confirm the two
digit minute. From SET TIME, press the Down button to set the name.
(3) SET NAME: When the LCD shows current name, press ENTER key to modify the
name display. Press Up or Down button to select one character from "A" to "Z",
"0" to "9", "_" , then Press ENTER to confirm, the cursor will move to next character.
MY NAME
There are 2 lines of 8 characters each for your use. From Set Name, press the Down
555_1234
button to change the password.
8
Trail Scout 6LIM.indd 10-11

(4) SET PASSWORD:

Password
When the LCD shows [Password Set], press the ENTER key to set the password.
Set
The LCD will show [Password Yes]. To change the password, press Enter.
Password
If you do not want to set a password, you can press the Up or Down key to select NO.
Yes
If you selected YES, the LCD shows [New Pswd]. Press the Up or Down key to select
the first password digit of 0-9. Press ENTER to confirm, the cursor will move to the
New Pswd next digit to the right. Repeat the process using UP, Down and Enter keys to enter
your four digit password. Press ENTER to confirm.
0 0 0 0
If you do not want to set a password when the LCD shows (PW YES) , you can press
the U/D button to select No, After pressing the ENTER, the LCD display shows (PW
Password
NO), and no password will be set.
None
When you are finished with SETUP, change K1 to the ON (UP) position and the
unit will be operating after a 5 minute delay.
c) Power OFF: Set K1 to "Off ", the Trail Scout will be OFF.
Setup Guide (cont.)
9
1/25/05 4:25:48 PM