Stihl FSE 60 Manual De Instrucciones página 15

English / USA
!
Warning!
Always disconnect the plug from the
power supply and make sure that the
cutting tool is stopped before doing any
maintenance or repair work or cleaning
the electric trimmer. Do not attempt any
maintenance or repair work not
described in your owner's manual. Have
such work performed at your STIHL
service shop only.
Only authorized personnel may replace
the power supply cord. A damaged
power supply cord must be replaced by
an identical STIHL replacement part.
Check cooling air inlets about every ten
hours of operation and clean if
necessary. Do not use any strong
detergents on the plastic housing or
handle. They can be attacked by certain
house-hold cleaners containing
aromatic oils such as pine or lemon, or
by solvents such as kerosene.
14
!
Warning!
Do not spray water on the trimmer,
moisture can cause an electric shock
hazard. Wipe the unit with a cloth.
!
Warning!
Never repair damaged cutting
attachments by welding, straightening or
modifying the shape. This may cause
parts of the cutting tool to come off and
result in serious or fatal injuries.
!
Warning!
Check condition of cutting tool at regular
short intervals. If behavior of tool
changes, check it immediately for
tightness or any signs of cracks in
particular. Replace damaged or dull
cutting tools immediately, even if they
have only superficial cracks.If the tool
loosens after being properly tightened,
the retaining nut may be worn or
damaged and should be replaced. If the
tool continues to loosen, see your STIHL
dealer.
Tighten all nuts, bolts and screws before
and after each use.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of this manual.
Store electric trimmer indoors in a dry,
high or locked location and out of reach
of children.
SAVE THESE
INSTRUCTIONS!
FSE 60