Enabling answer ring patterns
Note
ENXC
Ring pattern or distinctive ring service is available through some local
phone companies and allows you to have more than one phone number
on a single line. Each phone number has a unique ring pattern, allowing
you to answer voice calls and the product to answer fax calls.
If you subscribe to a ring pattern service with your phone company, you
must set the product to answer the correct ring pattern.
If you do not have ring pattern service and you change the ring pattern
settings to something other than All Rings, the product might not be able
to receive faxes.
To enable answer ring patterns
To enable answer ring patterns, use the following steps:
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select Fax Setup, and press
menu/enter.
3
Using the < and > buttons, select Fax Recv. Setup, and press
menu/enter.
4
Using the < and > buttons, select Answer Ring Type, and press
menu/enter.
5
Using the < and > buttons, select the ring pattern you want, and
press menu/enter.
6
After product installation is complete, ask someone you know to
send you a fax in order to verify that the ring pattern service is
working correctly.
Enabling answer ring patterns 17