Type of phone line
Dedicated fax line (receiving
only fax calls)
One line with two separate
numbers and ring pattern
service
Shared line (receiving both fax
and voice calls) with only an
attached phone
Shared line (receiving both fax
and voice calls) with an attached
answering machine or computer
voicemail
16 Chapter 1 Setting up
Recommended rings-to-answer table
Use the following table to determine the number of rings-to-answer to
use.
Recommended rings-to-answer setting
Set to one or two rings.
Note: Set to two rings if you are using a caller ID box.
One or two rings. (If you have an answering machine
or computer voicemail for the other phone number,
make sure the product is set to a lesser number of
rings than the answering system. Also, see
answer ring patterns" on page
Five rings or greater.
Two rings more than the answering machine or
computer voicemail. (Do not set the product to more
than nine rings in the U.S. and Canada, or to more
than six rings in other regions.)
To set the number of rings-to-answer
To set or change the number of rings-to-answer, use the following steps:
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select Fax Setup, and press
menu/enter.
3
Using the < and > buttons, select Fax Recv. Setup, and press
menu/enter.
4
Using the < and > buttons, select Rings To Answer, and press
menu/enter.
5
Using the alphanumeric keypad, enter the number of
rings-to-answer, and press menu/enter.
"Enabling
17.)
ENXC