To Connect The Product To A Jack With Two Phone Lines - HP LaserJet 3300 Manual De Instrucciones

1
2
3
4
8 Chapter 1 Setting up
To connect the product to a
jack with two phone lines
Use these steps to connect the product to a
single or split phone jack if you have a
dedicated line for fax calls and a separate line
for voice calls.
1 If a phone cord is plugged into the phone
jack, unplug the cord and set it aside.
2 If you do not have a phone jack with a
built-in splitter, plug an external
Line1/Line2 splitter (not included) into
the phone jack.
Note
There are two different kinds of splitters:
Parallel splitters (also called "T" splitters)
provide two phone line outlets for a line with a
single phone number; Line1/Line2 splitters
provide two phone line outlets for a line with
two unique phone numbers.
3 Open the print cartridge door and swing
open the left side panel to reveal the
phone line sockets.
4 Take the phone cord included with the
product and plug one end of it into the
product's line socket (the socket on top).
Note
You must use the phone cord that came with
the product in order for the product to
function correctly.
ENXC