To Connect The Product To A Jack With One Phone Line - HP LaserJet 3300 Manual De Instrucciones

1
2
3
6 Chapter 1 Setting up
To connect the product to a
jack with one phone line
Use these steps to connect the product to a
single phone jack with one phone line, even if
you have two telephone numbers on that line
and use a ring pattern service (such as
distinctive ring).
1 If a phone cord is plugged into the phone
jack, unplug the cord and set it aside.
2 Open the print cartridge door and swing
open the left side panel to reveal the
phone line sockets.
3 Take the phone cord included with the
product and plug one end of it into the
product's line socket (the socket on top).
Note
You must use the phone cord that came with
the product in order for the product to
function correctly.
ENXC