Attention; Introduction; Equipment Identification; Technical Data - Sagola S25 Manual De Instrucciones

Before activating the unit, you must read, take
note of, and entirely follow all the indications
described in this Manual.
You must keep the unit in a safe place and one
accessible for all unit users.
The unit must be started and handled exclusively
by personnel instructed in its use and must be
employed only for the purpose for which it was
designed.
The unit in your possession belongs to the family of
units used for cleaning aerographic spray guns, its
accessories, and complements, with water and/or
water based detergent, as well as compressed air.
Manufactured with stainless steel and constructed
in conformity with provisions found in the directive
89/392/EEC and subsequent modifications.
It consists of the following standard features:
The equipment S25 is provided with an enrollment that informs:
Brand commercializing company
Name and address
Mark
Model
Weight
Height
Long
Width
Maximum weight work area
Working pressure
Capacity
The S25 is designed for the automatic washing of
spray guns and parts using circulating solvent. It
is fully pneumatic and uses a double diaphragm
pneumatic pump to function.
Inside the washing tank there is the spray-jet
device where all the components of the spray
guns can be appropriately placed. Other small
objects may also be placed and automatically
washed inside the tank.

1. ATTENTION

2. INTRODUCTION

3. EQUIPMENT IDENTIFICATION

Number Enrolment
Serial number
Construction year

4. TECHNICAL DATA

25 kg.
980 mm.
500 mm.
550 mm.
max. 5 kg.
6 at 10 bar
2 guns
5. EQUIPMENT IDENTIFICATION
- 12 -
Likewise, Accident Prevention Standards, Regula-
tions, Work Centre Directives and current legisla-
tion and restrictions must be taken into considera-
tion.
SAGOLA S.A., the SAGOLA logotypes and other
SAGOLA products mentioned in this manual are
registered trademarks or brand names of the
company SAGOLA S.A.
- Washing machine, with hoses, connections, and
spray guns to project the necessary cleaning
liquid and compressed air.
- Instruction Manual.
- Packaging.
Optional and complementary unit parts:
- SAGOLA air hoses.
- SAGOLA air Purifiers and/or Regulators.
- SAGOLA compressed air connectors and couplings.
The machine could show up partially disassem-
bled. Then proceed with the assembly as shown
in the instructions manual.
The S25 is manufactured entirely of AISI 304
steel.