Position Of Electrodes - Ecoflam MAX GAS 40 P Manual De Instrucciones

420010385902 Max Gas 40 P - 70 P - 105 P - 120 P 420010385903 Max Gas 40 P - 70 P - 105 P - 120 P
EN
With the burner switched off, connect a DC microammeter with a 0÷50 or 0÷100 µA dial. When the burner is run-
ning, and is properly adjusted, the value read must be steady and never be smaller than 3 µA(Landis).
6 3
18
FLAME DETECTION SYSTEM CHECK
min. 3 µA

POSITION OF ELECTRODES

IONIZATION
PROBE
MOUNTING TO THE BOILER
TUBE DISASSEMBLY
10
1
ANDIS
GB 21 / GB 22
IGNITION
ELECTRODE