Position Of Electrodes - Ecoflam BLU 700.1 P AB Manual Del Usuario

420010243303 Blu 700.1 ÷ 1200.1 P AB Low Nox
EN
SETTING THE FIRING HEAD
The adjustment of the position of the firing head is made to obtain
the best combustion performance. When used at the minimum
power output the firing head is move back, whilst is forwarded at
the maximum output. Execution : -loosen the locking screw of
adjusting device A; - move the adjusting device until the desired
position is reached; - tighten the locking screw.
A
REMOVING THE NOSEPIECE

POSITION OF ELECTRODES

SEZIONE B- B
Ignition electrode
A
Ionization probe
B
B
A A
SE ZION E -
A
15