General Information; Safety Information - Hach TitraLab Total Hardness Manual Básico Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General information

N O T I C E
The manufacturer is not responsible for any damages due to misapplication or
misuse of this product including, without limitation, direct, incidental and
consequential damages, and disclaims such damages to the full extent permitted
under applicable law. The user is solely responsible to identify critical application
risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.

Safety information

Please read the entire user manual carefully before the equipment is
unpacked, set up or put into operation. Pay attention to all danger and
warning statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
To make sure that the protection provided by this instrument is not
impaired, do not use or install this instrument in any manner other than
that specified in these operating instructions.
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will
result in death or serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided,
could result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
English
4
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument.
Information that requires special emphasis.
Note: Information that supplements points in the main text.
Warning labels
Read all labels and tags attached to the instrument. Failure to do so may
result in personal injury or damage to the instrument.
For symbols applied to the instrument, corresponding warnings are
provided in the user manual.
This symbol, if noted on the instrument, references the instruction
manual for operation and/or safety information.
This symbol may be found on an enclosure or barrier within the
product and indicates a risk of electrical shock and/or death by
electrocution.
Electrical equipment marked with this symbol may not be disposed of
in European domestic or public disposal systems after 12 August
2005. In conformity with European local and national regulations,
European electrical equipment users must now return old or end-of
life equipment to the manufacturer for disposal at no charge to the
user.
Note: For return for recycling, please contact the equipment
manufacturer or supplier for instructions on how to return
end-of-life equipment, manufacturer-supplied electrical
accessories, and all auxiliary items for proper disposal.
Safety information for the correct use of the instrument
This instrument is intended only for indoor use.
Do not vibrate or jolt the instrument.

Publicidad

Tabla de contenido
loading

Tabla de contenido