Room Thermostat Trm-Vp And Trm-Fa; Use; Switches; Dimensions - Airwell KOG 30 LN 2T Manual De Instalación Y De Mantenimiento

7

ROOM THERMOSTAT TRM-VP AND TRM-FA

USE

The room thermostat of the air conditioner regulates the
room temperature. It is designed for closed, dry rooms
such as flats, offices, etc.
Maximum acceptable relative humidity of the air : 95%.
This value should not be exceeded.
Avoid condensation.

SWITCHES

Linear switch
High Speed Medium speed
Switch 0 - I
² ON "I"
²
OFF "0"

DIMENSIONS

WALL MOUNTING

² Remove the thermostat control knob, the
screw and the cover.
² On a flat surface, mount the control panel
using plugs and screws.
² Install the cover, the screw and the
thermostat control knob.
CHILLED WATER CASSETTE
e
lectricity
continueD
Lown Speed
Linear switch

ELECTRICAL CONNECTIONS

Connection of the thermostat TRM-VP and TRM-FA.
Connections should be made according to the diagram
(SEE APPENDIX).
Max. cross-sectional area of wires : 2,5 mm

TECHNICAL CHARACTERISTICS

Operating voltage
Contact configuration
Temperature range
Switching current at 230V AC
Switching differential
Sensor system
15
² COOLING
² HEATING
6A (cos ϕ=1) / 3A (cos ϕ =0.6)
approx. 0,5 K
Switches mode of operation
2
230V 50Hz
SPDT
5 to 30°C
bimetal
ON / OFF
fan speed