Opening / Closing Door; Activation After Selecting The Programme; Reset Programmsetting; Quick Start - Caso IMCG25 Manual Del Usuario

Microondas y grill
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 126
► Do not use any aluminium foil when using the microwave or combinations with the
microwave (see following table).
The following table is intended as a basis for selecting the correct cookware:
Cookware
Heat-resistant glass dishes
Non heat-resistant glass dishes
Heat-resistant ceramic dishes
Microwave-resistant plastic container
Kitchen roll
Metal sheet
Metal rack
Aluminium foil and container

12.4 Opening / closing door

Open door
Open the door of the device. If the device is switched on, the current cooking programme will
be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow the
accumulated heat to escape.
Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button Start/Quick Start.

12.5 Activation after selecting the programme

After selecting the program, press the button Start/Quick Start to start the preset cooking
programme.

12.6 Reset programmsetting

If needed , press

12.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance.
Press the Start/Quick Start button in quick sequence to set the cooking time (max 10
minutes). The oven starts automatically after 2 seconds.
caso IMCG25
Micro-wave
Please note
once to reset the settings of the device.
Grill
Convection
Combination
57

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido