Opening / Closing Door; Activation After Selecting The Programme; Reset Programmsetting; Quick Start - Caso TMG25 MenuTouch Instrucciones De Funcionamiento Originales

10.4 Opening / closing door


Open door
Open the door of the device. If the device is switched on, the current cooking programme
will be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow
the accumulated heat to escape.

Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button

10.5 Activation after selecting the programme

After selecting the program, press the button
programme.

10.6 Reset programmsetting

If needed , press

10.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance. Press the
minutes). The oven starts automatically after 2 seconds.

10.8 Pause/Cancel

In order to interrupt an ongoing cooking programme, you can proceed as follows:
Press the button once. The cooking programme that is in use will be stopped.
Or: Open the door of the device. The cooking programme that is in use will be stopped.
► To continue the interrupted cooking program, press the button
door.
To terminate the interrupted program, press the button
caso TMG25 MenuTouch
Please note
.
twice to reset the settings of the device.
button in quick sequence to set the cooking time (max 10
Please note
to start the preset cooking
a second time.
after closing the
57