Life Phases; Lifting Column Scope Of Delivery; Transport And Storage - RK Rose+Krieger Multilift II Instrucciones De Montaje

Ocultar thumbs Ver también para Multilift II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

7.1 Lifting column scope of delivery

The Multilift lifting column is supplied ready to use as a set. The following are included in the scope of deli-
very:
2 Multilift II units
Compact-e-3-EU/ US/ JP controller
Main cable (must be ordered separately)
4 cover strips
Hand switch (must be ordered separately)
Assembly instructions
4 sliding blocks
Plug & Work (initialised ex-factory)

7.2 Transport and storage

The product is to be checked by suitable personnel for visible and functional damage.
Any transportation or storage damage must be reported immediately to the person responsible and to RK
Rose+Krieger GmbH.
It is forbidden to put damaged lifting columns into operation.
The following ambient conditions are specified for storing the lifting column:
no oil-contaminated air
contact with solvent-based paints must be avoided
Lowest/highest ambient temperature: -20 °C/+60 °C
relative humidity: from 30 % to 85 %
air pressure: from 700 hPa to 1060 hPa
falling below the dewpoint is not allowed
Divergent environmental factors must be approved by RK Rose+Krieger GmbH.

7. Life Phases

53

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Multilift ii telescope

Tabla de contenido