Product Information; Mode Of Operation; Technical Specification; Technical Specification, Multilift Ii - RK Rose+Krieger Multilift II Instrucciones De Montaje

6.1 Mode of operation

The RKMultilift lifting column is used to adjust the height of tables or other adjustment tasks of a similar
kind. It is driven by a direct current motor.

6.2 Technical specification

6.2.1 Technical specification, Multilift II

Floor area
Installation height
Lift
Weight
Supply voltage (primary)
Protection class
Electrical connection
Max. power consumption
Max. power consumption
Duty cycle (ED)
Service life
Protection class
Continuous acoustic pressure level
Lifting speed
Max. compressive/tensile force
Position signal
(Cancellation Hall sensor)
Multilift II
355 mm, 400 mm, 452 mm, 498 mm
Basic weight: 4.89 kg + (0.061 kg/mm * Lifting range)
8 mm/s
3000 N/3000 N
Siehe "Diagramm 1: maximale Druck-/ Zugkraft in Abhängigkeit der Hublänge (Mul-
Increments per mm travel:
13 per channel

6. Product Information

312 x 90 mm (L x W)
Lifting range + 203 mm
24 V DC - 32 V DC
II
Molex connector, 8-pin
4,0 A at U = 24 V DC
120 W
Duty cycle: S3 10 per cent
10,000 cycles
IP 20
less than 60 dBA
1000 N/1000 N
tilift II)" auf Seite 15.
Increments per mm travel:
6.5 per channel
16 mm/s
43