Macintosh Installation - HP LaserJet 2200 Serie Guía De Instalación Rápida

Macintosh Installation

Note The Apple LaserWriter 8 driver must be installed to use the PPD. Use the
Apple LaserWriter 8 driver that came with your Macintosh.
Before beginning installation, turn off virus protection.
1
2
3
Note The HP LaserJet 2200 CD contains software for many languages. Once you select the
installation language and double-click Install in the desired language, the installation
screen will appear in that language.
4
5
6
If You Connected a USB Cable
1
2
3
4
5
6
ENWW
Run the install program by placing the HP LaserJet 2200 CD in the CD-ROM
drive. The installation window will appear on the desktop.
Select the correct language and double-click the installer icon.
Follow the on-screen instructions.
To verify that the installation has been completed successfully, open a software
application of your choice and open or create a simple document.
Make sure the correct printer name appears, and print the document.
If the document prints correctly, installation is complete. Continue to "Step 8:
Record and Store Important Information" on page 20. (If nothing prints or if the
document does not print correctly, see "If You Have Problems" on page 21.)
Open Apple's Desktop Printer Utility.
Select "Printer (USB)" and click OK.
Under USB Printer Selection, click Change.
Select the HP LaserJet 2200 printer and click OK.
Under "PPD" click Auto Setup.
Make sure you save your changes before you close the window.
Step 7: Install Printer Software 17