Detecting Devices; Operating The Scale In A Wireless Group; Activating The Wireless Module (Sys) - Seca 727 Manual De Instrucciones Y Garantía

Detecting devices

7.2 Operating the scale in a wireless group

......
rF
......
Activating the wireless
module (SYS)
68 •
If you wish to set up a wireless group with the scale, it
will search for other active devices from the
wireless
modules in the display on the scale (e.g. "MO 3"). The
meaning of the numbers is as follows:
• 1: personal scale
• 2: length measuring rod
• 3: wireless printer
• 4: PC with seca USB wireless adapter
• 7: baby scale
• 5, 6 and 8-12: reserved for system expansion
All the functions required to operate the device in a
seca wireless group can be found in submenu "rF".
For information on how to navigate in the menu see
page 62.
Learn Group (ID)
• On
Autosend
• Off
• On
System
• Off
• HI
• MA
Autoprint
• HI_MA
• Off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module disa-
bled. You have to activate it before you can set up a
wireless group.
1. Switch on the device.
system. The devices detected are shown as
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
NOTE
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power pack when
operating the device in a wireless network.
seca 360°
Stop Reg. Devices (MO)