Entering Waist Circumference; Completing The Measurement Procedure; Devices With Connection To An Emr System; Devices With Connection To The - Seca 651 Manual De Instrucciones

Entering waist circumference

6.5 Completing the measurement procedure

Devices with connection to an EMR

Devices with connection to the

seca analytics 125 software

When the
Waist circumf., page
and send it to your EMR System or the
with further measuring results.
1. Press the
2. Enter the waist circumference.
3. Confirm the entry with the
To complete a measurement on devices that are connected to an EMR
System System, proceed as follows:
1. Make sure that the displayed measured values are plausible.
2. Scan the patient and/or user ID.
The device indicates whether the scanned IDs are correct:
User ID OK
NOTE
Whether and the point in the measurement procedure at which the
IDs have to be scanned is defined when connecting the device to your
EMR System. If you have any queries in this regard, contact your
administrator or hospital technician.
3. Press the
The measuring results are submitted to the EMR System and are
assigned to the electronic patient file.
The device is ready for the next measurement.
To complete a measurement on devices that are connected to the
seca analytics 125
1. Press the
The Date of birth dialog window appears.
2. Enter the patient's date of birth.
symbol is visible on the main screen (➔
91), you can enter the waist circumference of the patient
seca analytics 125
display field.
key.
key.
Data have been submitted to the EMR System
software, proceed as follows:
key.
English
Selecting BMI/BSA/
software together
Patient ID OK
Operation • 87