Options Menu - Bentel Security B-TEL2 Manual De Instalación Y Usuario

Items in the File Menu include the following:
New Create a new client. It is recommended that one assign and save a new name for each client.
Save Save all of a client's settings, changes, and data to memory.
Open Open a client's data and settings.
Close Close out of all client information. Be sure to save all changes before closing.
Export Data Export the selected client configuration to file.
Import Data Import the client configuration previously saved under Export Data.
Exit Close the program and exit.
One can also perform Save and Close commands by right-clicking the mouse on the Bookmark Bar.
This menu contains the parameters and options for correct program operation. Items in the Options Menu are the
following:
Serial Ports Sets the serial port (RS232) to connect to the dialer through the GSM/LINK wire, as well as the
number of connection attempts (preset at 3 attempts).
Language Allows one to select the application's default language from those available.
Firmware Upgrade
The following paragraph describes in detail all the programming pages and their relative parameters.
Send and Load buttons: Except for the Messages Page, all programming pages show the two buttons
data from board, green arrow) and
is present. Even though they look the same as the buttons in the Select Programming Page window, the action
range of these two buttons is limited exclusively to the parameters of the single page currently displayed on the
screen.
Phonebook Page
Up to 8 telephone numbers, each 20 digits long, can be programmed on this page. To program one (or more)
telephone numbers, select the corresponding line from the list on the left and enter the data on the right.
To select more numbers, click on the table row while holding down the Control key on the PC keyboard. To
select a continuous series of numbers, select the first number and, holding down the Shift (or Maiusc) key
on the PC keyboard, the last number.
Description
- Enter the description for the selected telephone number in this box.
Telephone number
Behaviour
- Select the use for which the phone number is programmed. To disable the phone number
(leaving it in the memory for future use) select the None option.
Telemonitoring
- This section is only available if Telemonitoring is set in the Behaviour section. Click the
Protocol box to select one from those available. Every Telemonitoring protocol requires a 4-digit User PIN (5
digits for CESA protocol).
Button
- Click this button to select all telephone numbers on the list. Alternatively, clicking on the triangle
to the right, one can deselect the numbers.
Programmed telephone numbers will appear in the table with a different color, as explained in the Legenda
section
46

OPTIONS MENU

OPTIONS MENU OPTIONS MENU OPTIONS MENU OPTIONS MENU
COMMUNICA COMMUNICA
COMMUNICATION MENU COMMUNICA COMMUNICA
Quickly and easily upgrades the dialer's firmware. Once the new firmware is obtained from
the .HEX file, it can be loaded and sent to the dialer by pressing the
PROGRAMMING PROGRAMMING
PROGRAMMING PROGRAMMING PROGRAMMING
(Send data to board, red arrow). On the Log page, only the Load button
- Enter the telephone number in this box (enter only numbers).
FILE MENU FILE MENU FILE MENU
FILE MENU FILE MENU
TION MENU TION MENU
TION MENU TION MENU
button.
(Load
B-TEL2