Listening To An Aux Input Source - Kenwood HM-L700 Manual De Instrucciones

Listening to an AUX input source

Pressing the AUX key activates the power.
Set input to the
auxiliary channel.
Adjusting the AUX input level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input termi-
nal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD.
1
Press the mode key to get the setting mode.
Then, use the 4 and ¢ keys to select
"AUX INPUT" and press the enter/demo
key.
Main unit
\
\
Remote control unit
Press the enter/demo key while "AUX INPUT"
flashes on the display.
2
Use the 4 and ¢ keys to select the input
level.
3
Press the enter/demo key.
1. Set input to the auxiliary channel.
Press the AUX key.
1 1
2. Play the connected equipment.
To adjust input level, see "Adjusting the AUX input level" below.
\
\
1 1
Each time the 4 or ¢ key is pressed, the dis-
play switches as follows.
"TIMER SET"
"AUX INPUT"
"BALANCE"
"A.P.S. SET"
"DISPLAY SET"
"TIME ADJUST"
÷ Adjustment is possible from the range of - 3 to + 3.
Various CD playback features
27
EN