In case of difficulty
What seems to be a malfunction is not always so. Before calling for service, check the following table
according to the symptom of your trouble.
Operation to reset
The microcomputer may fall into malfunction (impossi-
bility to operate, erroneous display, etc.) when the
power cord is unplugged while unit is ON or due to an
external factor. In this case, execute the following pro-
cedure to reset the microcomputer and return it to nor-
mal condition.
÷ Please note that resetting the microcomputer
clears the contents stored in and it returns to condi-
tion when it left the factory.
Amplifier section/Speakers
Symptom
Sound is not produced.
The "on/standby (timer)" indicator blinks in red
and no sound is output.
The "on/standby (timer)" indicator blinks in
green.
No sound from the headphones.
Sound is not produced from the left or right
speakers.
The clock display blinks without changing the
figures.
Timer operation is not possible.
Tuner section
Symptom
Radio stations cannot be received.
Noise interferes.
AUTO MEMORY has been preset but it cannot
be received by pressing the P.CALL key.
Unplug the power cord from the power outlet, then
while holding the
cord again.
After resetting the microcomputer, the display will show
as follow:
÷ Connect properly referring to "System connections".
÷ Adjust to a required volume.
÷ Switch MUTE OFF.
÷ Unplug the headphone plug.
÷ Stop using the unit. There may be internal trouble. Shut power
OFF, unplug the power cord and call for servicing.
÷ Adjust the present time again.
÷ Set the timer ON/OFF time properly
÷ Insert correctly.
÷ Adjust to a required volume.
÷ Connect properly referring to "Changing the speaker cables".
÷ Adjust the present time again.
÷ Adjust the present time referring to "Clock adjustment".
÷ Set the timer ON time and OFF time.
÷ Connect antennas.
÷ Select a band.
÷ Tune to the frequency of the desired station.
÷ Install the outdoor antenna in an apart position from the road.
÷ Switch the suspected electric appliance OFF.
÷ Install the TV or the system at an increased distance between
them.
÷ Preset stations again with AUTO MEMORY.
÷ Preset stations manually with tunable frequencies.
Important items
key depressed, plug the power
Remedy
Remedy
7
%
^
¤
›
^
%
9
¤
¤
›
67
)
™
¡
£
41
EN