Safety Instructions - mundoclima MUPIR-H8 Serie Manual De Instalación Y Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INSTALLATION AND OWNER'S MANUAL

2. SAFETY INSTRUCTIONS

To prevent injury to the user, other people, or property damage, the following instructions
must be followed. Incorrect operation due to ignoring of instructions may cause harm or
damage.
Install the unit only when it complies with local regulations, by-laws and standards. Check
the main voltage and frequency. This unit is only suitable for earthed sockets, connection
voltage 220 t 240 V ~ / 50Hz.
The following safety precautions should always be taken into account:
-
Be sure to read the following WARNING before installing the unit.
-
Be sure to observe the cautions specified here as they include important items related
to safety.
-
After reading these instructions, be sure to keep it in a handy place for future
reference.
Do not install the unit yourself.
Incorrect installation could cause injury due to fire, electric shock, the unit falling or
leakage of water. Consult the dealer from whom you purchased the unit or a specialized
installer.
Install the unit securely in a place.
When insufficiently installed, the unit could fall causing injury. When installing the unit in a
small room, please take measures (like sufficient ventilation) to prevent the asphyxia
caused by the leakage of refrigerant.
Use the specified electrical wires and attach the wires firmly to the
terminal board (connection in such a way that the stress of the wires is not
applied to the sections).
Incorrect connection and fixing could cause a fire.
Be sure to use the provided or specified parts for the installation work.
The use of defective parts could cause an injury due to possible fire, electric shocks, the
unit falling etc.
Perform the installation securely and please refer to the installation
instructions.
Incorrect installation could cause an injury due to possible fire, electric shocks, the unit
falling, leakage of water etc.
Perform electrical work according to the installation manual and be sure
to use a dedicated section.
If the capacity of the power circuit is insufficient or there is an incomplete electrical circuit,
it could result in a fire or an electric shock.
WARNINGS
34

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido