Display On Each Status; Function Diagnosis; Parameter List - mundoclima MUPIR-H8 Serie Manual De Instalación Y Usuario

INSTALLATION AND OWNER'S MANUAL
6.3.4

Display on each status

Parameter Query
Note8Value twinkles, means it is available for changing, or in verse

6.4 Function Diagnosis

When Heat Pump is OFF, Dial 4 switches to 1, give the heat pump into status of function
diagnosis automatically.
Then display will show each symbol and change every 1 second.

6.4.1 Parameter list

Some parameters can be checked and adjusted by the controller. Below is the parameter
list.
Parameter Setting
No. Name
1 Compressor running Frequency
2 EEV Open degree
3 Ambient Temperature
4 Outlet Water Temp.
5 Exhaust gas Temp.
6 Return gas Temp.
7 Coil Temp.
8 4-way Valve outlet Temp.
9 Water Circulation Pump
10 4-way Valve Status
11 Standby
12 Standby
13 Standby
14 Standby
15 Standby
16 Running Current of Compressor
17 Voltage
18 Standby
19 Standby
20 Standby
21 Fan speed
Debugging Status
Instruction
Current Value Hz
Current Value/5
Current Value ö
Current Value ö
Current Value ö
Current Value ö
Current Value ö
Current Value ö
0-OFF91-ON
0-OFF91-ON
/
/
/
/
/
Current Value*10
Current Value /10
/
/
/
Current Value /10
48
Error Query