Controller Instruction; General; Dial Set - mundoclima MUPIR-H8 Serie Manual De Instalación Y Usuario

INSTALLATION AND OWNER'S MANUAL

6.1 Controller Instruction

6.1.1

General

Input Voltage: DC12V
RS485 Communication
Short-Press for 1~5 seconds
Long-Press for 5 seconds
No Button press for more than 30s, controller surface will exit to original normal.
User can operate the controller only when the screen is light on.
Back light of Screen is Purple, characters and symbols are black.
Operation temperature range for controller is -30|70ºC.

12.1.2 Dial Set

On the back of controller board, there are 4 dials:
DP1 DP2 DP3 DP4
ON for sound when water ON for back light on
ON for beep sound flow warning always ON for self-diagnosis status
OFF for no sound when OFF for back light on for
OFF for no beep sound water flow warning 30s OFF for normal
44