Astralpool OPTIMA PLUS Manual De Instalación página 12

Paragraph 13 – Level Alarm
Programming
PROG
-
-
Alarms
Level Stop
-
Paragraph 14 – Flow Display Unit
Programming
PROG
-
-
Unit
Standard
-
Paragraph 15 - Setting the Pause
Programming
PROG
Configuration
+
Paus
N.Open
-
EM00136408
Alarm Level
Stop
-
Alarm Flow
Alarm
ESC
Alarms
Level Alarm
-
Unit
Standard <-
-
+
Unit
L/h
-
-
+
-
rev. 1.0
This makes it possible to set the pump when the level
sensor alarm is activated. In other words you can decide
whether to stop dosage (Stop) or simply activate the alarm
signal without stopping dosage.
Changes can be made by pressing the
the keys to set the alarm type. Confirm by
pressing the key. Press
menu
This makes it possible to set the dosage unit of
measurement on the display.
Changes can be made by pressing the
the keys to set the unit of measurement,
choosing between L/h (liters/hour), Gph (Gallons/hour),
ml/m (milliliters/minute) or standard (% or frequency,
depending on settings). Press
the main menu
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
using the keys to set the new value ( N. OPEN
or N. CLOSED).
Press to confirm and return to the main menu.
Operation
key, then using
to return to the main
Operation
key, then using
to confirm and return to
Operation
key, then
10