Astralpool OPTIMA PLUS Manual De Instalación página 15

Alarms
Display
Fixed alarm LED
Flashing word "Lev"
I.e. Man
Lev P100%
Fixed alarm LED
Flashing words "Lev" and "stop"
I.e. Man
Lev Stop P100%
Flashing word "Mem"
I.e. 1:n 6
Mem
Flashing word "Mem"
I.e. 1:n M 6
Mem
Fixed alarm LED
Flashing word "Flw"
I.e. Man F
Flw P100%
I.e. Parameter Error
to default
Flashing word "OFA"
Flashing word "stop"
I.e. High 475 mV OFA
Stop P 75%
Flashing word "Alm"
I.e. High 475 mV Alm
P 75%
Flashing word "Cal"
I.e. High 475 mV Cal
P 75%
Fixed alarm LED
Flashing word "WDG"
I.e. Man F
WDG P100%
EM00136408
End of
interrupting pump operation
End of level alarm, with interruption
to pump operation
The pump receives one or more
impulses
memory function on Off
The pump receives one or more
impulses
memory function on On
Active flow alarm. The pump has
not received
number of signals from the flow
sensor.
Communication
eeprom.
PROG
O.F.A. alarm
The probe reading is outside the set
alarm band range
Probe not calibrated alarm
Watchdog
communication error
Cause
level alarm, without
during dosage with
during dosage with
the programmed
error with the
Alarm, ModBus
rev. 1.0
Interruption
Restore the liquid level.
Restore the liquid level.
Press the key
When the pump finishes receiving
external impulses, it returns the
memorised strokes
Press the key
Press the key to restore the
default parameters.
Press the key to stop the
flashing word "stop". Press the key
again to start up the pump again.
Make sure that the "Alarm Band"
parameter is set correctly in the
programme
Calibrate the probe
Press the key
13