Outputs For 1A - Tronic KH 3106 Instrucciones Para El Manejo Y La Seguridad

RZ_KH3106_Energiestation.qxd4

4. Outputs for 1A

Caution! Before performing any
kind of connection operations,
always satisfy yourself that both
your device as well as the energy
station are switched off – that is the
main switch in the "OFF" position
(centre position). In this way you can
prevent damage through connection
faults.
a) Connecting device
A total of 5 connection jacks are avail-
able for the power supply of devices
with a maximum power consumption
of 1 A:
Insert the adapter cable...
in the connection jack,
corresponding to the voltage
required for your device.
Select the suitable connector for
your device from the set.
07.11.2003 9:27 Uhr
Caution! Before connecting your
device to the energy station, first
ensure that, "Positive" and
"Negative" have not been
switched. Otherwise your device
can be damaged:
Connect the selected connector
... and the receptacle so that
positive and negative correspond to
the marking on the jack of your
device (Figure right).
48
Seite 48