LEGRAND KEOR LP 1 kVA Guia De Instalacion página 29

LED
Symbol
Indicator
Normal
Mode LED
Battery
Mode LED
Bypass
Mode LED
Battery
Bad/Weak
LED
Fault LED
1
Overload
1
LED
2
1
Site
1
2
1
wiring
1
2
fault LED
1
2
2
2
Outlet1
1
2
LED
2
1
Load
LED
2
1
Outlet2
2
LED
1. Steadily on indicates normal utility voltage. Blinking indicates
insufficient utility voltage for the full load. Off indicates abnormal
utility voltage.
2. In Battery/Load Test Mode indicates battery capacity
is 50%.
1. Indicates load supplied by battery power.
2. In Battery/Load Test Mode indicates battery capacity
is 25%.
1. Indicates load supplied by bypass.
2. In Battery/Load Test Mode indicates battery capacity
is 75%.
1. Indicates low battery power or faulty battery bank.
2. In Battery/Load Test Mode indicates battery capacity
is 100%.
1. Steadily on indicates fault or abnormal condition.
2. Blinking indicates LED Panel in Error Code Function Mode.
1. Indicates UPS is overloaded.
2. In Error Code Mode indicates Error Code 16.
1. Indicates live and neutral lines are connected wrongly or high
neutral-ground voltage.
2. In Battery/Load Test Mode indicates load capacity is 100%.
3. In Error Code Mode indicates Error Code 8.
1. Indicates UPS Outlets 1 are enabled and ready to supply loads.
(This function is optional.)
2. In Battery/Load Test Modeindicates load capacity is 75%.
3. In Error Code Mode indicates Error Code 4.
1. Indicates UPS outlets are enabled and ready to supply loads.
2. In Battery/Load Test Mode indicates load capacity is 50%.
3. In Error Code Mode indicates Error Code 2.
1. Indicates UPS Outlets 2 are enabled and ready to supply loads.
(This function is optional.)
2. In Battery/Load Test Mode indicates load capacity is 25%.
3. In Error Code Mode indicates Error Code 1.
KEOR LP 1, 2, 3 kVA
Description
29