Transport And Interim Storage - Wilo Control DigiCon Instrucciones De Instalación Y Funcionamiento

English
CAUTION
There is a risk of damaging the pump/unit. 'Caution' implies that damage to
the product is likely if the information is disregarded.
NOTE:
Useful information on using the product. It draws attention to possible
problems.
2. 2 Safety information for inspection and installation work
The safety information provided in the operating instructions for the
pump(s) must be observed for all work on interface converters and pump(s)
and the unit.
Risk of electric shock
Danger from electrical current must be eliminated.
Work on pump(s) and the unit may only done when they are stationary,
switched off at the mains and with suitable tools.

3 Transport and interim storage

Check the product for damage in transit immediately on arrival. If damage is
found, the necessary procedure involving the forwarding agent must be taken
within the specified period.
CAUTION! The interface converter is susceptible to damage
Careless handling during transport and storage can cause damage.
• The DigiCon/DigiCon-A interface converters must be protected from
moisture, frost and mechanical damage during transport and interim storage
• They must not be exposed to temperatures outside the range - 10°C to
+ 70°C.
22
WILO SE 04/2009