Conversion To Another Type Of Gas - Gaggenau VG491211CA Instrucciones De Instalación

en-us

Conversion to another type of gas

Conversion to another type of gas
C o n v e r s i o n t o a n o t h e r t y p e o f g a s
T his gas stovetop corresponds to the categories
specified on the rating plate. By changing nozzles, it is
possible to convert the appliance to any of the gases
listed on the plate. The conversion kit can be obtained
from our customer service. With some models, the
conversion kit is included in the scope of delivery.
Only a licensed specialist is authorized to switch the
appliance to another gas type.
Before carrying out the conversion, turn off the electricity
and gas supply.
14
Replacing the Main Control Nozzles: Wok Burner
1.
Remove the pan supports and all burner parts.
2.
Unscrew the fastening nuts from the cooktop (3 nuts –
WAF 7), and carefully lift up the cooktop to remove it.
3.
Remove the securing clips from the burner pipes. Pull
out the burner pipes. Unscrew the screw in the air
regulating sleeve. Remove the nozzle retaining head.
4.
Pull off the nozzle and O-ring for the inner burner ring
by hand. Unscrew the nozzle for the outer burner ring
(WAF 10).
5.
Check that the O-ring fits correctly in the new main
control nozzle for the inner burner ring. Fit the nozzle
to the burner pipe. Screw the new main nozzle for the
outer burner ring as far as it will go into the nozzle
retaining head.
6.
Attach the nozzle retaining head and burner pipes.
Attach the securing clips.
7.
After loosening the screw, adjust the air regulating
sleeve to the correct setting (see nozzle table).
Retighten the screw.