Before You Begin; Tools And Parts Needed; Parts Included; Special Accessories - Gaggenau VG491211CA Instrucciones De Instalación

Ventilation Recommendations
We strongly recommend the installation of a
ventilation hood above this appliance. The
hood must be installed according to
instructions furnished with the hood.
9
CAUTION
The appliance should not be installed
with a ventilation system that blows air
downward toward the burners. This
type of ventilation system may cause
ignition and combustion problems with
the gas cooking appliance resulting in
personal injury or unintended
operation.

Before You Begin

T ools and parts needed
B e f o r e Y o u B e g i n
Screwdriver Torx T20
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
▯
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts included

Special accessories

You can order the following accessories from your
specialist dealer:
AA 414 010 Ventilation molding, for operation
next to the VL 414 downdraft
ventilation
VA 420 000 Connection strip for combination
with other Vario appliances in the
400 series for flush installation
VA 420 001 Connection strip for combination
with other Vario appliances in the
400 series for flush installation with
appliance cover/compensation strip
en-us
Before You Begin
7