SMA SUNNY TRIPOWER STORAGE 60 Instrucciones De Instalación Y Reglaje página 36

4 Service
ID Status
message
492 not defined The formatting of the
Table 4.2 battery-related events
System-Related Events
ID Status
message
2000
2010,
2011
2012 -
2018
2030
2050
2051
2052,
2053
2054
2055 Fallback
activated
36 STPS60-IA-xx-12
Description
transmitted battery parameters
is not compatible.
Description
Communication assembly is
booting.
The software update of the
main CPU has started / has
finished.
The software update failed.
Transmission of the grid code
to the main computer failed.
Ethernet connection is active
Ethernet connection is
disconnected
Transmission of the Grid Code
from the SMA Inverter
Manager to the inverter has
started/ended.
Transmission of the Grid Code
from the SMA Inverter
Manager to the inverter has
failed.
The inverter switched to the
fallback mode after the
communication with the SMA
Inverter Manager was
interrupted.
Measure
Contact the battery manufacturer.
Measure
-
-
Restart the software update. If an
error occurs during the update,
contact Service.
If this event occurs frequently,
contact Service.
No measure necessary. This error is
used, for example, to identify bad
Ethernet cables.
No measure necessary. This error is
used, for example, to identify bad
Ethernet cables.
-
If this event occurs frequently,
contact Service.
SMA Solar Technology AG
DNO SMA DC
Service
Line
- - x
DNO SMA DC
Service
Line
- - -
- - -
- x -
- x -
- - -
- - -
- - -
- - -
- - -
Installation Manual