Important; Ac401-A Setup Requirements - Angelcare AC401-A Manual Del Usuario

SETUP REQUIREMENTS
INCLUDED:
1 Parent Unit (AC401-A)
or 2 Parent Units
(AC401-A-2PU and
AC401-A-2PU-2SP)
Nursery Unit
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 1/4'' (6 mm)
Minimum dimensions:
13'' x 13'' (33 x 33 cm)
Maximum dimensions:
equal to the mattress size

IMPORTANT

The hardboard must be larger than the
Sensor Pad surface area or in the case of
the AC401-A-2PU-2SP of two Sensor Pads.
BABY'S ROOM:
Sensor Pad(s)
Charging Cradle
2 AC Adapters (AC401-A)
or 3 AC Adapters
(AC401-A-2PU and
AC401-A-2PU-2SP)
Hardboard
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install
the Nursery Unit on a flat, stable surface facing the crib at a distance
of at least 3 feet (0.9 meter). Make sure to plug the adapter to the
socket outlet nearest to the equipment and that is easily accessible.
6
5
4
MOVEMENT &
SOUND MONITOR
Model AC401-A
4
5
6
1 Sensor Pad (AC401-A) or
2 Sensor Pads (AC401-A-2PU-2SP)
with pre-installed cord covers
4 Rechargeable AAA Batteries (AC401-A)
or 8 Rechargeable AAA Batteries
(AC401-A-2PU and AC401-A-2PU-2SP)
WHAT YOU WILL NEED (NOT INCLUDED):
4X
4 AAA Alkaline
Batteries
for Nursery Unit
IMPORTANT
Keep
at least
3 ft. (1 m)
3 2 1
3 2 1
for Parent Unit
Miniature Philips
Screwdriver
E
N
7