SETUP REQUIREMENTS
INCLUDED:
Camera
1 USB Cable
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 1/4'' (6 mm)
Minimum dimensions:
13'' (33 cm) x 13'' (33 cm)
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface area.
BABY'S ROOM:
IMPORTANT
DO NOT PLUG SENSOR PAD INTO CAMERA RIGHT AWAY. Place the crib near
a supporting wall and far from air currents. Install the Camera on a flat, stable surface
facing the crib at a distance of at least 3 ft. (0.9 m). Children have been STRANGLED
with cords. NEVER use sensor pad without the protective covering. Make sure to plug the
adapter to the socket outlet nearest to the equipment and that is easily accessible.
Sensor Pad
All manuals and user guides at all-guides.com
3
4
5
6
Sensor Pad with pre-installed cord covers
4X
4 AAA
1 AC Adapter
Alkaline
Batteries
Hardboard
6
5
4
VIDEO, MOVEMENT & SOUND
MONITOR FOR SMARTPHONE
Model AC1200
2
1
WHAT YOU WILL NEED (NOT INCLUDED):
Device with iOS 7.0 or
Android 2.3 and up
IMPORTANT
Keep
at least
3 ft. (0.9 m)
3
2
1
E
N
Miniature Philips
Screwdriver
7